Spool Valve, 4-Way, 2-Position, Normally Closed, Manual Override

SKU: SV10-41M

DESCRIPTION
A solenoid-operated, 4-way, 2-position, spool-type, direct-acting, screw-in
hydraulic cartridge valve. Spool Valve Manual Override.

OPERATION
When de-energized, the SV10-41M blocks flow to all ports. When energized, the spool
shifts to open flow between 3 and 4, and between 2 and 1.
Operation of Manual Override Feature: To override, push button in and twist
counterclockwise 180°. The internal spring will push the button out. In this position, the
valve may be only partially shifted. To assure full override shift, pull the button out to its
fullest extension and hold it in this position. To return to normal valve function, push button
in, twist clockwise 180° and release. Override will be detented in this position.

FEATURES
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• All ports may be fully pressurized.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E‑Coils rated up to IP69K.
• Continuous-duty rated coil.

RATINGS
Operating Pressure: 207 bar (3000 psi)
Proof Pressure: 276 bar (4000 psi)
Burst Pressure: 621 bar (9000 psi)
Flow: Up to 26 lpm (7 gpm)
Internal Leakage: 82 cc/minute (5 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
-26 to 204 °C (-15 to 400 °F) with fluorocarbon seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20 °C: Standard Coil: 1.2 A at 12 Vdc;
0.13 A at 115 Vac (full wave rectified).
E‑Coil: 1.4 A at 12 Vdc; 0.7 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-4; See page 9.110.1_4w
Cavity Tool: CT10-4xx; See page 8.600.1
Seal Kit: SK10-4x-MMM; See page 8.650.1
Coil Nut: Part No. 7004400