Electric Hydraulic Double Acting Directional Control Valve,4 Spool,25 GPM

Electric Hydraulic Double Acting Directional Control Valve, 4 Spool, 25 GPM

This double acting hydraulic control valve controls the flow of hydraulic fluid in/out of a hydraulic cylinder or motor (depending on spool type). These valves add additional auxiliary hydraulic functions or replace a current hydraulic control valve. This operates as a four station, open-center, series configuration setup.

Three Spool Options Available:

A Spool (Controls Double Acting Cylinders)

• All spools are double acting with spring return to neutral position, A spool controls double acting cylinders
• A and B ports are closed to Tank in neutral position

C Spool (Closed Center)

• A & B Ports are closed in the neutral position, and designed for double-acting cylinders.
• T port is closed to tank in the neutral position, and is designed for use on closed-center hydraulic systems. No load sensing options are available on this valve.

D Spool (Motor Control)

• All spools are double acting with spring return to neutral position, D spool is designed for non-load holding applications such as motors and horizontal cylinders
• A and B ports are open to Tank in neutral position
• Intended for Closed Center Systems

H Spool (Open Center)

• All spools are double acting with spring return to neutral position
• All four ports are open in neutral position
• Intended for Open Center Systems

Valve Body Features:

• Solid aluminum housing designed for rugged use
• Max Operating Pressure: P = 5080 PSI, T = 3050 PSI, A & B = 5080 PSI
• Flow Rating: 25 GPM
• Aluminum Body
• 3000 PSI Rated
• #12 SAE (1 1⁄16 – 12 ORB) female thread Work Ports
• #16 SAE (1 5/16 -12 ORB) female thread Outlet (Tank) Port
• #12 SAE (1 1⁄16 – 12 ORB) female thread Inlet (Pressure) Port

Switch Features:

• Switch Box with four momentary rocker switches that spring automatically to the neutral position
• Weatherproof enclosure and DIN connectors
• 1 Switch Box with three momentary rocker switches
• 1 36″ Valve Harness with 8 DIN connectors
• Optional 10′ and 20′ Extension Harness Available

Solenoid Specifications:

• Nominal Voltage Tolerance +/- 10%
• Power Rating: 37 Watts
• Amps: 3.08
• 100% Duty Cycle.