Electric Hydraulic Double Acting Directional Control Valve,1 Spool,25 GPM

Electric Hydraulic Double Acting Directional Control Valve, 1 Spool, 25 GPM

This double acting hydraulic control valve is designed to control the flow of hydraulic fluid in/out of a hydraulic cylinder or motor (depending on spool type). These valves can be used to add additional auxiliary hydraulic functions or replace a current hydraulic control valve. This operates as a two station, open-center, series configuration setup.

Three Spool Options Available:

A Spool (Controls Double Acting Cylinders)

• All spools are double acting with spring return to neutral position, A spool controls double acting cylinders
• A and B ports are closed to Tank in neutral position

D Spool (Motor Control)

• All spools are double acting with spring return to neutral position, D spool works for non-load holding applications such as motors and horizontal cylinders
• A and B ports are open to Tank in neutral position
• Intended for Closed Center Systems
• Note: Single spool D spool valves will not work on open center systems. P is closed in neutral and has no where to bypass to.

H Spool (Open Center)

• All spools are double acting with spring return to neutral position
• All four ports are open in neutral position
• Intended for Open Center Systems

C Spool (Closed Center)

• For use on closed-center hydraulic systems
• A & B Work Ports are closed to tank in the neutral position

Valve Body Features:

• Solid aluminum housing designed for rugged use
• Max Operating Pressure: P = 5080 PSI, T = 3050 PSI, A & B = 5080 PSI
• Flow Rating: 25 GPM
• Aluminum Body
• 3000 PSI Rated
• Port Sizes
• #12 SAE (1 1⁄16 – 12 ORB) female thread Work Ports
• #12 SAE (1 1⁄16 – 12 ORB) female thread Outlet (Tank) Port
• #12 SAE (1 1⁄16 – 12 ORB) female thread Inlet (Pressure) Port

Switch Features:

• Switch includes a 3′ switch harness and 10′ extension valve harness for a total of 13′ between switch and valve
• Momentary push button rocker switch box allows for easy control
• Mountable Switch Bracket

Solenoid Specifications:

• Nominal Voltage Tolerance +/- 10%
• Power Rating: 37 Watts
• Amps: 3.08
• 100% Duty Cycle

Will this valve work for my application?

You’ll need to answer the following questions:

1. Is the flow through this valve between 15 GPM and 25 GPM? If you’re unsure about the flow and you’re installing this on a tractor please check tractor-data.com, it will say under the hydraulics – “Pump Flow” – of the data sheet. If not installing on a tractor The GPM flow may be printed on the pump itself or inside the manual for the pump.
2. Do you have an open-center or closed hydraulic system? If you’re installing this on a tractor please check tractor-data.com, it will say under the hydraulics of the data sheet whether it’s an open-center or closed-center hydraulic system. Open-center systems are by far the most common on tractors. You can select if this valve is for use on open or closed hydraulic systems. NOTE: None of our valves have load-sensing capabilities. NOTE: Single spool D spool valves will not work on open center systems. P is closed in neutral and has no where to bypass to.
3. Are you operating a hydraulic cylinder or a hydraulic motor? If you’re operating a hydraulic cylinder you’ll need to get “A” spools for double acting cylinders, if you’re operating a hydraulic motor you’ll need “D” spools for motor control. NOTE: “D” spools cannot be used for operating hydraulic cylinders and “A” spools cannot be used to operate hydraulic motors.

Example Connections (Theses are just some examples, more are possible):

e