Hydraforce CV08-20-0-N-60 Piloted Spool-Type Logic Element Valve

SKU: CV08-20-0-N-60

Hydraforce Part Number: CV08-20-0-N-60

Screw-in, cartridge style, hydraulic check valve for use as a blocking or load-holding device.The valve allows flow passage from port 1 to port 2, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at port 1 to open to port 2.

• 3500 PSI Rated (240 Bar)
• Fits VC08-2 Cavity
• Uses Size 08 (1/2″ Hole) Solenoids

Specifications:

Pressure Rating:

• 241 bar (3500 psi)

Proof Pressure:

• 350 bar (5075 psi)

Maximum Internal Leakage:

• 2 drops/min Note: At 241 bar (3500 psi)

Operating Fluid Temperature:

• • -40 to 100 °C (-40 to 212 °F) Note: With buna N seals
  • -26 to 204 °C (-15 to 400 °F) Note: With fluorocarbon seals
  • -54 to 107 °C (-65 to 225 °F) Note: With polyurethane seals
  • -40 to 149 °C (-40 to 300 °F) Note: With HNBR seals

Storage Temperature:

• -40 to 70 °C (-40 to 160 °F)

Ambient Temperature:

• -40 to 90 °C (-40 to 194 °F)

Fluids:

• Mineral based or synthetic hydraulic fluid with lubricating properties

Fluid Viscosity Range:

• 7.4 to 420 cSt

Maximum Operating Contamination Level:

• 20/18/14 per ISO 4406

Installation Specifications:

Cavity:

• VC08-2
• 08-size-2-way Cavities

Cartridge Installation Torque:

• 25.8 to 28.5 N-m (19 to 21 ft-lb)

Maximum Allowable Torque:

• 54 N-m (40 ft-lb)

Orientation Restriction:

• None